Our newly formulated Nourish Wood Oil is a user-friendly clear linseed oil for the protection of timber. It has UV protection and anti-mould growth properties.
We are currently out of stock of this product. We don't have a date at the moment when we will be expecting more stock, however, if you wish to place a 'back order' request please do so here
Remove any dirt and clean the wood. This can be done with warm water with some sugar soap. Make sure to rinse with clean cold water and let the timber dry completely. When the wood is dry lightly sand with fine grit sandpaper, 120 grit.
Ensure wood is dry before applying the Nourish Wood Oil. Apply the Nourish Wood Oil generously and rub well into the wood using a sponge or a brush. Leave for about 30 minutes, then wipe off excess with a cotton rag. Go over the surface again with a new dry rag to ensure the surface is dry and the oil has absorbed into the wood.
Important: you need to get the oil polished off well within one hour before it starts to dry. If required, the process can be repeated after 2-3 days of drying.
WARNING: Always wet used rags under a tap before disposing of them as they could otherwise self-combust.
15-20 m2 per litre (160-220 sq.ft. per 33.8 fl.oz.).
You need to re-oil approximately every 2-3 years in order to preserve and protect the timber.